NORTH (812) 422-4351 4511 FIRST AVENUE
EAST (812) 479-6868 601 S. GREEN RIVER ROAD
Drostes Jewelry Shoppes
NORTH (812) 422-4351 4511 FIRST AVENUE

EAST (812) 479-6868 601 S. GREEN RIVER ROAD


Clarity describes the presence or absence of inclusions within the diamond and blemishes on its surface.

These slight "birthmarks of nature" make every diamond quite unique. However, they do affect the beauty and value of the diamond. These natural birthmarks are often referred to as inclusions. The fewer inclusions a diamond has the more rare and valuable it is. Diamonds which contain numerous inclusions are less brilliant because inclusions interfere with light passing through the diamond.

The GIA (Gemological Institute of American) clarity grading scale outlined below is the most widely accepted clarity grading system in the world. GIA's clarity grading scale specifies eleven grades:

Flawless (FL),
Internally Flawless (IF),
(VVS1-VVS2), Very, Very Slightly Included
(VS1-VS2), Very Slightly Included
(SI1-SI2), Slightly Included
Imperfect (I1,I2,I3).

The GIA clarity grading system is presented below. The following illustrations are to be used only as a reference. In terms of appearance, diamonds present an endless variety of clarity-characteristic combinations, so there can never be a single description that automatically describes a given grade.

The illustrations shown below are actual plots from GIA diamond quality reports in which GIA assigned a clarity grade. Plots are drawn using different colors of ink to distinguish between blemishes and inclusions: red for inclusions, green for blemishes , cavities, naturals, knots and laser drill holes, and black for extra facets. If you would like to learn more details about how a diamond is plotted, click the following link: Learn More About Plotting Diamond Clarity.

GIA (Gemological Institute of America) and the AGS (American Gem Society) provide the most accurate certifications and clarity grades. Both GIA and AGS provide diamond plots that detail every internal and external characteristic that is visible in a diamond at 10X magnification.

Diamond certifications from EGL (European Gemological Laboratory), IGI (International Gemological Institute) and other gemological laboratories usually plot only the more noticeable internal and external characteristics. Minor inclusions that are difficult to see may not be shown on the plot.

FL: (Flawless) Flawless diamonds show no inclusions or blemishes of any sort when examined by a skilled grader under 10X binocular magnification.

IF: (Internally Flawless) No inclusions, and only insignificant surface blemishes. Normally, what separates IF from FL diamonds are characteristics that can be removed by very minor repolishing.

VVS1/ VVS2: (Very Very Slightly Included) Minute inclusions that are difficult for even a skilled grader to see under 10X binocular magnification. In VVS1, they are extremely difficult to see, visible only from the pavilion, or small and shallow enough to be removed easily by repolishing. In VVS2, inclusions are still difficult to see. Typical inclusions: scattered pinpoints, taint clouds, slightly bearded girdles, internal graining, and tiny feathers, chips and bruises.

VS1/ VS2: (Very Slightly Included) Minor inclusions ranging from difficult to somewhat easy for a trained grader to see when examined using 10X magnification. Typical Inclusions: small included crystals and feathers, distinct clouds, and groups of pinpoints.

SI1/ SI2: (Slightly Included) Noticeable inclusions that are easy (SI1) or very easy (SI2) to see when examined by a trained grader using 10X magnification. Typical inclusions: small included crystals, clouds, feathers.

I1,12 and I3: (Imperfect) Obvious inclusions that are often easily eye-visible face up; in I3 may threaten durability.Typical inclusions: large included crystals and feathers.

More Facts to Know about Diamond Clarity Grading:

It is important to be known that inclusions and blemishes are much more difficult to see in the actual diamond than they usually appear as drawn on the diamond plot.

Select a diamond that is better than eye perfect. Droste's Certified Gemologist-Appraisers recommend selecting a diamond with a clarity grade between FL and SI2. Diamonds with a clarity grade of SI2 usually will not display inclusions to the unaided eye in diamond sizes under one carat.

When selecting a diamond which weighs between one and two carats, it is best to select a diamond with a clarity grade of SI1 or higher to be sure no inclusions will be visible to the unaided eye. Diamonds that weigh over two carats may require selecting a diamond with a clarity grade of VS2, VS1 or higher.

Is Clarity Quality less important that Carat Weight, Cut and Color quality?

If your goal is to select the most attractive and brilliant diamond possible within a specified budget, it is important to consider selecting a diamond with a better cut quality, larger size or a higher color grade than it is to select a diamond with a very high clarity grade. For example: Consider two diamonds that are nearly the same in price. Both diamonds weigh one carat. One diamond has SI1 clarity grade, very fine cut and fine white D color. The other diamond has a FL (flawless) clarity grade, average cut and near white H color. Because FL and SI1 clarity grades appear the same to the unaided eye and differences in cut quality, color and size are very apparent, the D color SI1 will stand out to be the most beautiful diamond for the price.

If you have questions or need guidance in selecting a clarity grade that is right for you, please call Certified-Plus Diamonds at 1-800-766-7119. Our Certified Gemologist-Appraisers will be more that happy to assist you.

become a droste's premiere club member for additional savings, bonus cash and benefits!
Paypal Visa Master Card Discover American Gem Society GIA EGL-USA
Sign up to receive our newsletter, Special offers and more